Tube-Tech MP2A 2 Channel Microphone Preamplifier and DI
$4,150.00
An impedance switch to match the input perfectly to all types of microphones, an overload indicator and 2 dB gain steps.
Please check with us about availability
Description
Tube-Tech MP2A Microphone Preamplifier and DI
The MP 2A is a combined mic preamp/DI, based on a classic TUBE-TECH design, but featuring even higher fidelity and a few new features: An impedance switch to match the input perfectly to all types of microphones, an overload indicator and 2 dB gain steps
MP2A is the second in the new range of upgraded microphone preamplifier/DI’s.( The modular PM1A was the first.)
These new preamps features even higher headroom and fidelity than the earlier TUBE-TECH micpre”s.
MP2A Technical Description
The TUBE-TECH MP2A is a combined Microphone Preamplifier and Direct Instrument amplifier.
The input provides switchable 48 V phantom power, selectable mic. impedance of 600/1200/2400 Ohm, phase reverse switch, low-cut filter (20 Hz/40 Hz/off), as well as a switchable -20 dB pad.
Gain is adjustable from 10 dB to 70 dB.( 10db steps, coarse 2 dB steps, fine.)
The Direct Instrument Input are unbalanced with a gain ranging from 10 dB to 60 dB.
The amplifier is all tube. Input transformer is enclosed in a MU-metal can. Input and output transformers come with a static screen between the primary and secondary wirings. The input and output are balanced as well as fully floating.
Additional information
| Condition | New |
|---|---|
| Brand | Tube Tech |
Technical Spec
- Frequency response @ -3 dB: 5 Hz to 60 kHzv - Typical noise: 5 dB @ 200Ω
- CMRR: > 60 dB @ 10 kHz
- Gain: 10 dB to 70 dB in 2 dB steps - DI gain: 0-60 dB
- Selectable mic input impedance: 600 Ω/1.2 kΩ/2.4 kΩ
- Selectable pad in front of input transformer (-20 dB)
- Selectable 48 V phantom power
- Low cut filter (20 Hz/40 Hz/Off)
- Phase reverse
- Overload indicator
- Gold plated switches
- DI jack input for a variety of instruments
- DI input impedance > 1 MΩ
- MU-metal shielded input transformer
- In- and outputs are transformer balanced and fully floating
Download User Manual for Tube-Tech MP2A Microphone Preamplifier and DI
Download Specifications for Tube-Tech MP2A Microphone Preamplifier and DI
Download Brochure for Tube-Tech MP2A Microphone Preamplifier and DI
Related products
AEA TRP2 optimized for ribbon mics, condensers, and dynamics with 1U half-rack with optional hardware, two channels with 85dB, switching power supply.
Transformerless design with matched hi-speed discrete transistor octet has +23 dBu input headroom.
Vintage Neve Style All Class A, transformer-coupled Dual Mic/Line Pre, DI Input, Input impedance selector, External 24V PSU
This is the mic pre-amp version of the 1073 equaliser having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids.
The Mic Pre IIT's high pass filter is continuously variable from 10-200Hz, and drops at 12dB per octave. It seems to have a magical ability to clean up the muck while making what remains sound even better.
You have not viewed any products yet.