Tube-Tech PE-1C Passive Program Equalizer
$3,140.00
The PE 1C is a passive, all-tube EQ, based on the classic PULTEC EQP 1A design and featuring a passive EQ section and a high quality op amp.
Please check with us about availability
Description
Tube-Tech PE-1C Passive Program Equalizer
The PE 1C is a passive, all-tube EQ, based on the classic PULTEC EQP 1A design and featuring a passive EQ section and a high quality op amp. With the original Pultec out of production for decades and used examples demanding sky-high prices, the PE 1C is by far the easiest way to achieve this unique and coveted sound.
The PE 1C low end section combines two separate passive EQ filters with slightly different cut/boost frequencies. When the two sections are combined, this results in truly unique EQ curves, often named the “Low End Trick” and very useful for cleaning up low/mid frequencies.
The high frequency and midrange bands really stand out in terms of transparency and clarity, and the PE 1C is broadly regarded as one of the world’s finest passive tube based equalizers.
Technical Description
The TUBE-TECH PE1C is a passive tube based program equalizer based on the design of the old PULTEC EQP1A, featuring an all passive eq section and a high quality op amp. All components used are of the highest standard.
The TUBE-TECH PE 1C Program Equalizer contains a low frequency boost and attenuation section (shelving), and a high frequency boost section (peaking). The high frequency section has variable bandwidth as well as attenuation (shelving). The filter section is of the passive type followed by a tube based push-pull amplifier to restore the gain.
Input and output are transformer balanced as well as fully floating. Input and output transformers come with a static screen between the primary and secondary wirings.
Additional information
| Weight | 14 lbs |
|---|---|
| Condition | New |
| Brand | Tube Tech |
Technical Spec
- Freq. resp. @ -3 dB: 5 Hz - 40 kHz
- Low noise: < -85 dBU @ 0 dB gain
- CMRR: > 60 dB @ 10 kHz
- All-tube passive EQ
- 4 LF frequencies: 20, 30, 60 and 100 Hz (Boost: 0 to +14 dB, attenuation: 0 to -18 dB)
- 10 HF boosts with variable bandwidth: 1, 1.5, 2, 3, 4, 5, 8, 10, 12 and 16 kHz (0 to +18 dB w/ sharp Q, 0 to 10 dB w/ broad Q)
- 3 HF attenuations: 5, 10 and 20 kHz (0 to -18 dB)
- Input impedance: 600Ω
- No insertion loss
- Clickless In/Out switch
- Conductive plastic potentiometers
- In- and output are transformer balanced and fully floating
Download User Manual for Tube-Tech PE-1C Passive Program Equalizer
Download Specifications for Tube-Tech PE-1C Passive Program Equalizer
Download Recall Sheet for Tube-Tech PE-1C Passive Program Equalizer
Download Brochure for Tube-Tech PE-1C Passive Program Equalizer
Related products
Master Tape 1/4″ x 1,250′ 7″ with Slotted Plastic Reel
Balanced Attenuator Pack W/ 8 rotary balanced faders, db25 standard analog I/O, Stereo or mono selectable, Passive 5k ohm impedance, Post mic pre attenuation, Stepped volume controls.
Sound Anchor Wall Mounts are made for those situations where for some reason floor stands will not work. They are designed to allow the engineer to mount a pair of monitors on the wall.
3 channel horizontal 500 series rack with linking option.
Two-channel mic-pre / tube compressor
MDS-36 NAB Metal Reel Tape for Reel size: 10.5″ & Tape Length: 3600′
Analog reactive load box and guitar recording system for tube guitar amps, featuring Dynamic Speaker Modeling, World-class Universal Audio EQ, compression, delay, and reverb effects built-in, Selectable 4, 8, and 16-ohm operation.
Stereo Pressure Gradient Microphone with Continuously Variable Pattern, Class-A Electronics and 2 Capsules in One Housing
You have not viewed any products yet.