WesAudio Prometheus 500-Series Equalizer
$1,399.00
Proprietary THD implementation and flexible DAW/Live plug-in control for instant recall.
Description
WesAudio Prometheus 500-Series Equalizer
WesAudio Prometheus is fully analog passive EQ with +24dBu of headroom. It features pultec-style warm sound with a lot of innovative improvements. Its modern approach to design allows instant recall of your classic vibe through very flexible plugin available in most common formats. WesAudio Prometheus as all ng500 products, integrates with your DAW environment via front panel USB socket or _TITAN chassis.
Innovative Desgin With Fully Analog Circuit
_PROMETHEUS is fully analog equalizer with +24 dBu of headroom.
Passive EQ
- Low section with boost and cut, frequencies: 20, 30, 60, 100, 120, 250 Hz.
- High boost section with following frequencies – 2, 3, 4, 5, 8, 10, 12, 16 kHz.
- High cut section with following frequencies – 4, 8, 12, 20 kHz.
Stereo / Dual Mono / Mid-side Operation Modes
_PROMETHEUS can work in 3 different modes, including MS, which makes it perfect solution for multiple applications!
Output Control
Post-EQ Output Control For Better Flexibility!
Hardware A/B
Even using _PROMETHEUS as pure analog signal processor you can easily switch between two parallel settings with a magic of a simple button.
THD – Add Color To Your Mixes
THD stands for “Total harmonic distortion” and it allows to saturate your signal with beautiful analog color.
FLexible Daw / Live Plug-in Control For Instant Recall
- Stereo plugin which handles all modes of operation – Stereo/Dual Mono/Mid-Side
- Mono plugin where two separate instances can connect to same hardware managing each channel separately
- IN/OUT metering with clip detection
- Plugin comes in AAX/AAX DSP/VST3/VST2/AU
Features:
- +24dBu of headroom
- Stereo / Dual mono / Mid/Side operation mode
- Passive equalizer (Pultec-style) design based on inductors
- Low frequency boost/cut- 20, 30, 60, 100, 120, 250 Hz.
- High frequency boost- 2, 3, 4, 5, 8, 10, 12, 16 kHz.
- High frequency cut- 4, 8, 12, 20 KHZ.
- Proprietary THD implementation
- Flexible DAW/Live plug-in control for instant recall
- 6 touch sensitive encoders allows to record automation
- True bypass
- In and OUT metering with clip detection
- A/B compare feature
To learn more about Wesaudio, Click Here
Additional information
| Weight | 35 lbs |
|---|---|
| Condition | New |
| Brand | WesAudio |
Technical Specifications
- Frequency response: 10Hz-150kHz (-2dB)
- THD+N < 0.01% (1kHz,0dBu)
- Input impedance: 10kohm
- Output impedance: < 100ohm
- Max signal level: +24dBu
- Crosstalk:< -100dB
- THD (MID switch): 1%
- THD (HIGH switch): 2.5%
- Power consumption: 70mA per rail
- Dimensions : 76x133x158mm
Related products
1-channel EQ with high and low shelving, a parametric EQ, and a dynamic EQ section.
Based on the classic dbx 905 and 3-band parametric EQ with a selectable bell or shelf type filters on low and high-frequency bands.
500 Series Mono Class-A Discrete Microphone Preamp / DI with BX4 Steel Output Transformer
500 Series 10-band Graphic EQ with Transformer-balanced Signal Path, Highpass and Lowpass Filters, and 2520 Style Op-amp
Independent Slot Power technology and tantalum caps on each slot with XLR sockets in/out for each slot.
Features Continuously variable detented Gain, Threshold, Attack, Ratio and Release controls, 10 segment LED meters, Over Threshold LED, Patented THRUST Switch, 3 selectable compressor curve Knee settings, Selectable New or Old switch, Selectable variable or auto compressor, Audio circuit uses 2520 and 2510 Discrete Op Amps with transformer output.
Single Channel 500 Series Noise Gate Module with Variable High and Lowpass Filters, Envelope Control, Attack, Hold, Decay, and Range Controls
You have not viewed any products yet.