BAE 1066D Mic Pre/EQ Pair w/PSU (Blue)

BAE 1066D Mic Pre/EQ Pair w/PSU (Blue)

The BAE 1066D Mic Pre Pair w/PSU (Blue) is completely hand-wired using Carnhill (St. Ives) transformers and has the same mic-line pre-amp as the 1073, with the exception that the 1066D adds a few different frequencies to your pallet.

This unit is popular among guitarists for having a unique mid-range. The original 1066 only had a 10k shelving but this unit offers additional frequencies: 10k Hz,12k Hz,16k Hz, 20k Hz and 24k Hz.

Features:

– High Frequency: +/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz
– Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz &220Hz
– Mid Range: +/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz
– High Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz & 360Hz
– EQ Button: Switches the equaliser on or off
– Phase Button: 180°

To know more about BAE Audio, Click Here

View more products from BAE Audio

Brand	BAE
Condition	New

Frequency Response

- 10Hz to -3dB at 55kHz

3 Band Equaliser

- HF:+/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz
- LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
- MF: +/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz

High Pass Filter

- 45Hz, 70Hz, 160Hz & 360Hz

Mic Input Impedance

- ≈1200/300 ohms

Line Input Impedance

- 10k ohms

DI Input Impedance

- ≈150k ohms

Output Impedance

- 65 ohms

Common Mode Rejection Ratio

- 100dB min @ 60Hz

Maximum Output Level

- +27.4 dBu @ 600Ω

Power Requirements

- 115/230 VAC, 28W

Gain dB

- 0 to 80 dB

Equivalent Input Noise

- -110 dBu; Unweighted 300kHz Bandwidth

Weight (Module/Rackmount)

- 6 LBS / 2.72 KG
- 10 LBS / 4.54 KG

Dimensions in Inches (Module/Rackmount)

- 45 mm W x 8.75 inches H x 10.5 inches D
- 19W x 1.75L x 9D