Drawmer DA6 Distribution Amplifier

Drawmer DA6 Distribution Amplifier

The distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs. The Drawmer DA6 is a six channel stereo (or twelve channel mono) distribution amplifier featuring XLR balanced inputs and outputs with optional transformer balancing where remote amplifiers and recorders are fed from separate power supplies.

The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 1 x mono input/12 x mono output unit or any combination of the two.

The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further Drawmer DA6 units for the distribution of even more channels.

Features:

• 1×6 Stereo Distribution Amp with Monitoring.
• 1 set of stereo (2) XLR inputs.
• 6 sets of stereo (2) XLR outputs.
• Input stage has LED level meter.
• Each output channel can be switched to mono.
• Each output channel can be individually monitored.
• Built-in headphone amp.
• Optional transformer balanced outputs.
• Electronically balanced inputs with individual left/right level controls.
• LED metering on input for balancing stereo material or two mono signals.
• Left / Right level controls on each output with a stereo / mono switch.
• Headphone jack to monitor output of selected channel.
• LED metering on output of selected channel.
• Auxiliary pair of balanced 1/4″ output jacks for linking multiple Drawmer DA6 units.
• 1 unit rack space.
• Inputs and Outputs are balanced XLRs at +4dBu.

To learn more about Drawmer, Click Here

View more products from Drawmer

• Input Impedance: 15Ω
• Max. Input Level: Bal. +23.5db, Unbal. +18db
• Max. Output Level: Bal. +22.5db, Unbal. +17.5db Into 600 Ω(Any output)
• Output Impedance: 33Ω (Electronically Balanced)
• Noise: Better Than -95 Db, (Gain=0db, Bandwidth 22hz - 22khz)
• Crosstalk: Better Than -90db @ 10khz, (Input Grounded, Any Channel Output)
• Distortion: @ 1khz Output 0db Better Than 0.008%, +10db Better Than 0.008%, +20db Better Than 0.015%
• Bandwidth: 18hz To 32khz -1db
• Headphone Amplifier: Will deliver 1 Watt into 8Ω
• Recommended Headphone Impedance 8Ω to 600Ω
• Transformer Option: Outputs fitted with specified transformer will have the following specification:-
• Max. Input Level @ 40 Hz: +6dB for 0.5% THD.
• Distortion @ 1 KHz: 0 dB Output better than 0.008%
• Bandwidth 10 KΩ Load: 20 Hz - 45 KHz
• Insertion Loss: 0.10dB (with 10 KΩ load)
• Bandwidth 600Ω: Load 20 Hz - 33 KHz
• Insertion Loss: 0.67dB (with 600Ω load)
• DCR Winding 1: 6.9Ω+ 7.6 Ω
• DCR Winding 2: 11.6Ω
• Power Requirements: 115volt Or 230volt At 50-60hz, 30 Watts
• Fuse Rating: 160ma For 230volt, 315ma For 115volt
• Conforming To IEC 127-2
• Fuse Type: 20mm X 5mm, Class 3 Slo-blo, 250volt Working
• Case Size: 482mm (W) X 44mm (H) X 200mm (D)