BAE 1073MP Mic Pre/DI w/o Power Supply (Blue)

BAE 1073MP Mic Pre/DI w/o Power Supply (Blue)

The BAE 1073MP Mic Pre/DI w/o Power Supply (Blue) is the mic pre-amp version of the 1073 equaliser having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids.

A Carnhill transformer coupled input, with two selectable impedances makes the BAE 1073MP Mic Pre/DI w/o Power Supply (Blue) work well with a variety of microphones.

There is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.

As a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth.

Features:

– All Class A, transformer-coupled design in a 19″ 1U chassis.
– Line level XLR inputs for extra versatility as a line preamp.
– High impedance DI for guitar and synth.
– The same Class A components as the 1073 and 1084.
– Illuminated phase reverse and phantom power push-buttons.
– Input impedance selector switch between 1200 and 300 ohms.
– Same modular design and hand-wiring BAE is known for.
– Regulated linear power supply will run up to four channels.

Resources

Tips:

Set the gain knob (red Marconi) around 20 on the dial and set the output (grey knob) fully clockwise. This gives you the highest headroom and cleanest signal path. Every click is in 5db increments so if one click is too hot, attenuate the output to get in between the 5db steps.

Another trick people like to do is to put the final mix through the line inputs on the back to get that harmonic distortion. To get even more of that Class A output stage is to come out of channel 1 and into channel 2 then you have an accumulative effect of that classic output stage.

To know more about BAE Audio, Click Here

View more products from BAE Audio

Weight	10 lbs
Brand	BAE
Condition	New

- Frequency Response: 10Hz to -3dB at 55kHz
- Mic Input Impedance: ≈1200/300 ohms
- Line Input Impedance: 10k ohms
- DI Input Impedance: ≈150k ohms
- Output Impedance: 65 ohms
- Common Mode Rejection Ratio: 100dB min @ 60Hz
- Maximum Output Level: +27.4 dBu @ 600Ω
- Power Requirements: 115/230 VAC, 30W
- Gain dB: 0 to 71 dB
- Equivalen Input Noise: -110 dBu; Unweighted 300kHz Bandwidth
- Weight (Single/Dual): 8 LBS/3.63 KG, 10 LBS/4.54 KG
- Dimensions (Inches): 19W x 1.75L x 9D

Download Recall Sheet for BAE 1073MP Mic Pre/EQ/DI (Blue)