Coil Audio CA-70s Single Channel Preamp
$1,899.00
A standalone single channel 2U version of our larger CA-70 PS6 preamp module.
Please check with us about availability
Description
Coil Audio CA-70s Single Channel Preamp
The Coil Audio CA-70s is a standalone single channel 2U version of our larger CA-70 PS6 preamp module but with onboard power and a more streamlined control layout. It boasts the exact same American style circuit, tubes, transformers, and high-end components as its PS6 sibling but with a more elegant and user-friendly design. Simply put – The CA-70S is the easiest way to get those classic heavy Octal tube tones into your studio.
To learn more about Coil Audio, Click Here
Additional information
| Brand | Coil Audio |
|---|---|
| Condition | New |
Technical Specifications
CA-70S Amplifier:
- 2U steel enclosure with integrated power supply
- CT-110HN high nickel input and CT-41 output transformers installed
- Negative feedback tone adjustment with LOW filter
- Two-stage 6J7/6C5 vacuum tube single ended circuit
- 42db-54db of available gain
- Flexible input pad section for Mic or Line level operation
- 150 Ohm Mic input, 20k Line input, 600 Ohm output
- NOS tubes, signal caps & resistors, PEC 2W carbon pots
- Slow Ramping/Linear regulated Power Supply to prolong tube life
- Hand Built and Tested in the USA
Related products
Featuring the Lundahl LL1538, TRS line input, and Switchable input impedance including classic ISA 110 setting.
A remote-controlled mic preamp & A-D interface for Dante w/ Dual PSUs.
19" rack mount/ four-channel microphone preamplifier version of the PEQ2. “NICO” transformers (Nickle/Iron/Cobalt) with HP Filters
This is the high-pass filter version of the 1073MP. The 1073MPF is the mic pre-amp version of the 1073 equaliser, sharing the the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs and maintained focused mids.
The Mic Pre IIT's high pass filter is continuously variable from 10-200Hz, and drops at 12dB per octave. It seems to have a magical ability to clean up the muck while making what remains sound even better.
AEA TRP2 optimized for ribbon mics, condensers, and dynamics with 1U half-rack with optional hardware, two channels with 85dB, switching power supply.
A standalone single channel 2U version of our larger CA-286 PS6 preamp module.
The API 862 is a limited run microphone preamp/EQ celebrating API's 50th anniversary.
You have not viewed any products yet.
