Drawmer LA12 Stereo Distribution Amplifier

Drawmer LA12 Stereo Distribution Amplifier

The Drawmer LA12 Stereo Distribution Amplifier is a low noise, low crosstalk distribution amplifier with high bandwidth specification. The unit provides one stereo input with master ‘gain’ and ‘balance’ controls and twelve stereo outputs, each with individual output level control. It may be used to distribute one stereo signal to up to twelve different outputs. A typical application example would be for the distribution of one stereo signal to other rooms/areas within a complex e.g. nightclub, shopping mall etc., but it may be used for a variety of other applications, such as real time cassette duplication.

Features Include:

• One stereo input with master gain and balance controls.
• Twelve stereo outputs each with individual output level controls.
• If more than twelve stereo outputs are required an auxiliary stereo output, which follows the input gain and balance controls, can be linked to the input of a second LA12.
• The unit will operate at system levels in the range – 20dB to + 10dB.
• A maximum gain of + 20dB is available through the unit which allows a wide range of ‘source’ and ‘destination’ equipment to be interfaced.
• All audio connections are on professional quality phono (RCA) connectors for ease of installation.

To learn more about Drawmer, Click Here

View more products from Drawmer

• Input Impedance: 22KΩ
• Input Gain: Max+10dB
• Output Gain: -40dB to +10dB
• Noise: Better Than -100 Db, (ref+4dBv, Gain=0dB, @ 22hz - 22khz)
• Crosstalk: -67dB @ 10khz, (Input Grounded, Any Channel Output)
• Distortion: 0.008%, +100Hz, 0.015% @ 1kHz to 10kHz
• Bandwidth: 5hz to 25khz -1db
• Power Requirements: 115volt Or 230volt at 50-60hz, 7 Watts
• Fuse Rating: 32mA for 230volt, 63mA For 115volt
• Conforming to BS EN 60127-2: 1991 Sheet III
• Fuse Type: 20mm X 5mm, Class 3 Slo-blo, 250volt Working
• Case Size: 482mm (W) X 44mm (H) X 200mm (D)