Dynaudio LYD 48 Active Nearfield Speaker Monitor (Single)

The latest addition to the LYD series: the 3-way LYD 48

The 3-way LYD monitor. With its newest addition to the LYD personal reference monitor series, Dynaudio is bringing a new perspective to power and precision for producers and musicians everywhere – with unmatched accuracy at any volume level.

This 3-way near- to midfield monitor reaches eyebrow-raising levels of accuracy thanks to a new soft-dome tweeter and Dynaudio’s proprietary MSP midrange driver and woofer. Each driver is fuelled by a powerful, state-of-the-art Class-D amplifier and a full 24-bit/96kHz signal path. And, like the rest of the Dynaudio LYD 48 range, it lets you fine-tune low frequency response, position and sound-balance using cutting-edge DSP.

Each of the woofers and the tweeter are powered by a dedicated state-of-the-art Class D amplifier, delivering 80W / 50W / 50W of power per monitor. The amp features a 96kHz/24bit signal path and selectable input sensitivity, as well as the same Standby Mode as the original LYD speakers.

Also, like the other LYD monitors, the new 3-way version features Bass Extension, allowing for a choice between the default setting or pushing towards maximum bass or maximum volume. Changes will affect the low-end response, but importantly the linear frequency response remains intact.

The Sound Balance option is basically a tilt filter that tips the tonal balance gently. In short, it emphasizes one end of the spectrum while decreasing the opposite end by the same amount. This approach is different from typical shelving filters, as it alters the frequency response, but without interfering with the phase. By default the monitor is set flat, but the Sound Balance toggle switch can go for either ‘Bright’ or ‘Dark’.

To learn more about Dynaudio, Click Here

View more products from Dynaudio

• Max SPL (1m, Pair): 112dB
• Principle: Bass reflex
• Crossover Frequencies: 460Hz / 5.5kHz
• Tweeter: 1 inch soft dome
• Midrange: 4 inches
• Woofer: 8 inches
• Dimensions (W x H x D): 369 x 234 x 328mm
• Weight: 12kg
• Sensitivity (85dB @ 1m, free field):
• 6dB: 50 mV
• 0dB: 100mV
• -6dB: 200mV
• Amplifier:
• Power (Tweeter/Midrange/Woofer): 50W/50W/80W
• Type: Class-D
• Power consumption standby: <0.5dB
• Power consumption max: 100W
• Input voltage: 90 - 264V AC, 50 - 60Hz
• Inputs:
• XLR Balanced
• RCA Unbalanced
• Outputs: N/A
• Frequency response -6dB limits:
• Bass extension 10Hz: 60Hz - 21kHz
• Bass extension 0Hz: 50Hz - 21kHz
• Bass extension -10Hz: 40Hz - 21kHz
• Free field frequency response: 50Hz - 19kHz
• Frequency response -10dB limits:
• Bass extension +10Hz: 52Hz - 24kHz
• Bass extension 0Hz: 42Hz - 24kHz
• Bass extension -10Hz: 32Hz - 24kHz