Genelec 8020D 50W 4″ Woofer Powered Studio Monitor

Styled in what the manufacturer has dubbed a “Producer Finish”, and utilizing Class-D amplification, the Genelec 8020D Active Two-Way 4″ Studio Monitor provides accurate reproduction of the source material in a compact form factor. Its MDE die-cast aluminium rounded shape minimizes frequency and reflection distortions caused by edge diffraction. The 19mm metal dome tweeter is surrounded by Genelec’s Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.

The 8020D is built with Intelligent Signal Sensing (ISS) technology, which automatically activates the speaker when an audio signal is detected and puts it in standby mode when no signal is present, reducing its energy consumption to less than 0.5W. The 8020D features a 50W high-frequency amplifier for its 3/4″ tweeter, and a 50W low-frequency amplifier for its 4″ woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.

• Attached Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
• Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications, and multimedia entertainment systems
• Rear-facing treble-tilt, bass roll-off, and desktop cut controls enable you to optimize the speaker to its environment
• Threaded holes for wall or ceiling brackets
• Active crossover filter
• Driver unit protection circuitry
• Woofer and tweeter magnetically shielded

Key Features:

• 4″ Woofer, 3/4″ Tweeter
• 50W Bass Amplifier
• 50W Treble Amplifier
• Auto-Switching to Standby Saves Power
• Class-D Amplification
• MDE Cabinet Reduces Distortions
• Wide On- and Off-Axis Response
• Die-Cast Aluminum Enclosure
• Iso-Pod Table Stand Reduces Vibration

To learn more about Genelec, Click Here

View more products from genelec

• Monitor Type & Configuration: Active 2-Way
• Total Power Output: 100 W
• Tweeter: 1x 0.75" / 19.1 mm Metal Dome
• Woofer: 1x 4" / 10.2 cm Cone
• Audio I/O: 1x XLR 3-Pin Balanced Input (10 Kilohms)
• Number of Included Monitors: Single Monitor
• Enclosure: Bass-Reflex/Ported, Shielded

Drivers:

• Tweeter: 1x 0.75" / 19.1 mm Metal Dome
• Woofer: 1x 4" / 10.2 cm Cone
• Amplifiers
• HF: 1 x 50 W
• LF: 1 x 50 W

Performance:

• Frequency Response: 62 Hz to 20 kHz ± 2.5 dB
• Maximum Sound Pressure Level (SPL): 107 dB
• Total Harmonic Distortion (THD): 0.05%
• THD+N: < 0.05%
• Maximum Input Level: +24 dBu
• Analog Input Sensitivity/Gain: +36 to -6 dBu (Continuously Variable)
• Self-Generated Noise: Less Than 5 dBA (at 3' / 1 m)
• Protections and Limiting: Driver Protection

Signal Processing:

• EQ:
  • 1x LF Shelf: -4 to 0 dB at 65 Hz
  • 1x Low-Mid Notch/Peak: -4 to 0 dB at 200 Hz
  • 1x HF Tilt: -2 to 0 dB at 15 kHz
• Crossover Frequency: 3 kHz

Connectivity:

• Audio I/O: 1x XLR 3-Pin Balanced Input (10 Kilohms)
• Network I/O: No
• USB: No
• Wireless: No

Power:

• AC Input Power: 100 to 240 VAC, 50/60 Hz
• Power Consumption:
  • 0.5 W (Standby)
  • 3 W (Idle)
  • 60 W (Maximum)
• Dimensions (W x H x D): 6 x 9.5 x 5.6" / 151 x 242 x 142 mm
• Weight: 7.0 lb / 3.2 kg