Primacoustic IsoWedge 4 Pack
$159.96
Please check with us about availability
Description
The IsoWedge is a monitor speaker isolation kit. Each kit contains 4 pieces of high-density low compression foam. Each piece measures 12.8” x 4” x 2”. IsoWedge pads are cut with a 6 degree slope that can provide for effective down-firing placement in elevated installations (on a meter bridge) or the pad can be reversed for up-firing tabletop installation.
Additional information
| Weight | 3 lbs |
|---|---|
| Condition | New |
| Brand | Primacoustic |
Related products
Adopted by countless studios around the world over the past 10 years the ST2 Pro is Trinnov Audio entry level professional audio processor it features our unique loudspeaker/room optimization technology, with up to four simultaneous processing channels.
The ultimate routing management for your speakers setup.Full analog transparent system without internal channels mixing.
Our Optimizer technology is arguably the most efficient supercharger for your mixes. With its softer price tag, NOVA makes this essential technology more accessible to music makers.
The D-MON Series is a new range of Digital Monitoring Processors, with the acclaimed Optimizer room correction and EUCON integration for AVID Pro Tools systems. The D-MON will fit exactly into your studio configuration. Whatever your speaker sets may be, whether your mixes are in stereo, 5.1, 7.1 or even Dolby Atmos up to 9.3.6.
The IsoWedge is a monitor speaker isolation kit. Each kit contains 4 pieces of high-density low compression foam. Each piece measures 12.8” x 4” x 2”. IsoWedge pads are cut with a 6 degree slope that can provide for effective down-firing placement in elevated installations (on a meter bridge) or the pad can be reversed [...]
True active bass absorption (and not noise cancelling) - the AVAA C20 is the first of its kind. Many people from the audio industry call it a revolution.Easy to set up and move, no calibration required, and efficient like passive absorbers 25 times its size, the AVAA C20 takes care of any room modes between 15 Hz and 150 Hz.
A monitor speaker stand is a studio must. A typical monitor on a stand is located about half way between the floor and the ceiling. The floor/ceiling bounce returns back to the monitor out of phase. This imposes a phase cancel effect on the speaker's output; for example, the first cut is around 74 Hz for 8' ceilings, causing the engineer to boost 74 Hz in the mix unnecessarily.
You have not viewed any products yet.