Aviom 16/o-Y1 16 Channel Yamaha Output Card

Aviom 16/o-Y1 16 Channel Yamaha Output Card

The Aviom16/o-Y1 A-Net Card provides a direct digital interface between Yamaha® digital mixer products and Aviom’s Pro16® Series, including the A640, A360, A320, and legacy A-16II Personal Mixers, A-Net distributors, and output modules.

The Y1 card eliminates the need for an analog input module when creating a monitor mixing or audio distribution system. Assign any combination of channels, direct outputs, aux sends, groups, or sub-mixes from the Yamaha console user interface to the Y1 card as needed. Each Y1 card installed in a console’s MY expansion slot supports up to 16 channels.

The Aviom16/o-Y1 card provides a direct digital interface between Yamaha digital products that use the MY-format expansion slots and Aviom’s Personal Mixers. The Y1 card becomes the head end to the monitoring system, simplifying system setup. Just connect a Cat-5e cable from the card to an A-Net Distributor and some Personal Mixer and you’ve created a monitor system that can be expanded as needed with additional personal mixers, output modules, and A-Net distributors.

In systems using the A640, A360, or A320 Personal Mixer, two or more console cards can be combined to create a network up up to 64 sources. Just add the SB4 System Bridge to combine the console cards’ A-Net outputs and connect the SB4 output to a D800 or D800-Dante A-Net Distributor. The D800 will merge the data into a single A-Net stream.

Configuration and Setup

Configuration of the input sources for an Aviom monitoring system can be done digitally from the Yamaha console’s user interface. This gives the console operator the option of routing any combination of channels, direct outputs, aux sends, groups, or sub-mixes from the console to the Y1 card as needed. The console’s powerful scene memory can be used to send different groups of channels into the monitors as needed during a performance.

Features:

• Mini-YGDAI (MY) format, supported by most Yamaha digital consoles
• One 16-channel Pro16 A-Net output
• Supports sample rates from 44.1kHz to 48kHz, +/-10%
• Assign audio outputs directly from the Yamaha interface
• Channel Link DIP switches for stereo operation

To learn more about Aviom, Click Here
View more products from Aviom

• A-Net Pro16 Output: 16 channels of A-Net digital data; * 8 channels on PM1D
• Interface Format: Yamaha mini-YGDAI (MY) Expansion Card
• Maximum Expansion: Limited only by the number of available MY expansion slots in the digital mixer
• Sample Rate: 44.1kHz to 48kHz, +/-10%
• Digital Conversion: 24-bit
• A-Net Output: A-Net Out: 1; EtherCon RJ45 connector
• DIP Switch:
• Switch 1-8: Stereo Link on/off
• Switch 9-10: A-Net mode
• A-Net Modes: 8-channel, 16-channel, Aviom, Test
• Default is switch 9 up, 10 down
• A-Net Pro16:
• A-Net allows 16 channels of audio to be transmitted over one Cat-5e cable
• use unshielded Cat-5e UTP (or better) cable;
• max. length 500 feet (150m) between device
• Latency: <0.880 msec (measured from analog input to analog output)
• Power Supply: none required;
• uses Yamaha host device as source of power
• Dimensions: 4.75" (120.7 mm) wide x 6.25" (158.8 mm) deep; 1.5" (38.1 mm) high
• Weight: 0.8 lbs (0.36 kg)
• Options:
• SB4 System Bridge; used to combine up to four A-Net streams for
• transmission over one Cat-5e cable (requires D800 or D800-Dante A-Net Distributor)