Single 18", 600 W RMS Class D AMP, Selectable Stereo Balanced Input, Link or Xover Balanced Stereo Output Mode, Compact and sturdy wood cabinet, Lightweight, Polarity Switch, Flat Or Boost Mode Switch
Single 12", 600 W RMS class-d amplifier, Stereo balanced input, Link or x-over balanced stereo output mode, Compact and sturdy wood cabinet, Lightweight, Polarity inversion switch, Flat or boost EQ mode switch
2000 Watt Peak power - 1000 Watt RMS, 135 dB max SPL, 30 Hz - 140 Hz frequency response, 1 x 18" Woofer, DSP controlled Input section with selectable presets, Tour grade safe and solid variable mechanics, compatible with HDL 20-A, Designed to compliment the HDL 20-A speaker system, Baltic birch tour grade cabinet
Digital bi-amped amplifier with 1400 Watt peak power, 90° x 30° directivity (+5°, -25°), 3 x 10" neo woofer, 1.4" compression neo driver, 3.0" voice coil with a waveguide, DSP Processing with optimized phase response
2800 W power rating, 136 dB SPL Max, 30 - 400 Hz Frequency Range, 1 x 18" Hyper Ventilation Neodymium Subwoofer, DSP Controlled Input Section with selectable presets, RDNet remote monitoring and control, Delay Control, Baltic Birch Cabinet
control and monitoring network in between Ethernet (remote control) / USB (direct control) and RDNet
18" Woofer, 4.0" voice coil vented woofer 2500 Watt Peak, 1250 Watt RMS with DSP Delay Control
63 Ampere Cekon power input with 5 m cable, 32 Cekon outputs, 4 x LKS 19 outputs, 6 x Powercon outputs + 1 Powercon auxiliary output, 24 x individual power line RCBOs, 32 Ampere and Auxiliary individual front RCBOs,Tour Grade flight case construction
hardware interface to connect RCF RDNet compatible devices (TTL55-A, TTL33-A II, TTL31-A II, etc.) to a Personal Computer
7200 Watt Peak power - 3600 Watt RMS,143 dB max SPL, 25 Hz - 120 Hz frequency response, 2 x 21" Woofer, DSP controlled Input section with selectable presets, Delay control, Integrated mechanics for multiple configurations with HDL50-A, HDL20-A, HDL10-A, RDNet remote and control, Baltic birch tour grade cabinet
5000 Watt Peak power - 2500 Watt RMS,141 dB max SPL, 30 Hz - 120 Hz frequency response, 2 x 18" Woofer, DSP controlled Input section with selectable presets, Delay control, Integrated mechanics for multiple configurations with HDL 20-A, Baltic birch tour grade cabinet
Hybrid architecture DSP, 48 KHz sampling, 40 bit floating point engine, 16 x 16 I/O matrix, Dante enabled network audio transport, 8 AES/EBU inputs – 8 AES/EBU outputs, Ethernet connectivity and control, Maximum latency 3 ms, Easy to use software GUI
800 Watt Peak, 400 Watt RMS, 129 dB max SPL, 45 Hz - 20 kHz frequency response, 12" Woofer, 2.5" voice coil, 1" Driver, 1.4" voice coil
1200 Watt Peak, 600 Watt RMS, 131 dB max SPL, 45 Hz - 20 kHz frequency response, 15" Woofer, 2.5" voice coil, 1" Driver, 1.4" voice coil
800 Watt Peak, 400 Watt RMS digital bi-amplification, 127 dB max spl, 60° x 60° constant directivity horn, 10" High power neodymium woofer, 2.5" voice coil, 1.7 kapton dome, 1" exit, neodymium high frequency driver, DSP processing, floor - fre field equalization, soft limiter and protection, Combo xlr/jack input, xlr signal output
1400 Watt Peak, 700 Watt RMS digital bi-amplification, 129 dB max spl, 60° x 60° constant directivity horn, 12" High power neodymium woofer, 2.5" voice coil, 1.7" kapton dome, 1" exit, neodymium high frequency driver, DSP processing, floor - fre field equalization, soft limiter and protection, Combo xlr/jack input, xlr signal output
40-bit floating point processing DSP and 48 kHz 24-bit HI-Q Analogue/Digital Conversion, dynamic range > 112 dB. 8 universal inputs (48V), 6 outputs - 4 Euroblocks bal., 2 RCA plugs, 10 programmable logic inputs (GPI), 6 programmable logic outputs (GPO), 2 of which supported by relay. Configurable parametric EQs, gates, compressors, limiters, delays, priority levels, automatic gain control, levels, gains on in-out and cross points, auto-mixer operations, filters. Each unit can work as dual-room combiner with independent auto-mixer facility for each room. Configurable ALC (Automatic Level Control) facility by using Input 8 to connect a noise detection microphone. The control is then assignable to any output or group of outputs. USB connectivity for device configuration. RDNet Networked Control
1400 Watt Peak, 700 Watt RMS digital bi-amplification, 130 dB max spl, 60° x 60° constant directivity horn, 15" High power neodymium woofer, 2.5" voice coil, 1.7" kapton dome, 1" exit, neodymium high frequency driver, DSP processing, floor - fre field equalization, soft limiter and protection, Combo xlr/jack input, xlr signal output
1400 W 2-way class-D amplifier, 131 dB SPL Max, 50 – 20000 Hz Frequency Range, 90° x 60° constant directivity coverage, 12" woofer, 2.5" voice coil, Horn loaded 3.0''neodymium c. driver. Multiple rigging points
1400 Watt, 31 dB max SPL, 5 Hz 20 kHz frequency response, 4 x 6" Woofers, 2.5" voice coil RCF Precision C. Driver on waveguide, 100° x 30° slightly tilted pattern control, DSP controlled Input section with single or dual eq. preset, Pole mountable, Stackable, Flyable, Baltic Birch Plywood enclosure with internal structural metal bracings
7200 Watt Peak power - 3600 Watt RMS, 142 dB max SPL, 30 Hz - 400 Hz frequency response, 2 x 18" Woofer, DSP controlled Input section with selectable presets, RDNet remote control, Delay control, Baltic birch cabinet
7200 Watt Peak power - 3600 Watt RMS, 143 dB max SPL, 25 Hz - 120 Hz frequency response, 2 x 21" Woofer, DSP controlled Input section with selectable presets, Delay control, Integrated mechanics for multiple configurations with HDL50-A, HDL20-A, HDL10-A, RDNet remote and control, Baltic birch tour grade cabinet
1400 watt 2-way peak power, 131 dB max SPL, Class-D Bi-amplification, SMPS, DSP sound processing, 90° x 60°, wide dispersion constant directivity horn, 12" woofer, high power, 2.5" voice coil, 1.4" HF driver, titanium dome, neo 3.0" v.c., FiRPHASE processing
1400 Watt Peak power - 700 Watt RMS, 131 dB max SPL, 40 Hz - 120 Hz frequency response, 1 x 12" Woofer, Stereo crossover, Switchable crossover frequencies, Designed to compliment the HDL 6-A speaker system, Polarity reverse switch
2000 Watt Peak power - 1000 Watt RMS, 133 dB max SPL, 40 Hz - 140 Hz frequency response, 1 x 15" Woofer, 3.5" v.c., DSP controlled Input section with selectable presets, Tour grade safe and solid variable mechanics, compatible with HDL 10-A, Designed to compliment the HDL 10-A speaker system. Baltic birch tour grade cabinet
1400 W, two-way amplification, 131 dB max SPL, 1.7" voice coil neodymium compression driver, 2 x high power neodymium 6.0"woofers, 48 kHz, 32 bit floating point DSP processing, Symmetrical design, Extremely low weight, FiRPHASE processing
1400 Watt Peak power - 700 Watt RMS, 133 dB max SPL, 65 Hz 20 kHz frequency response, 2 x 8" Woofers, 1 x 2" Compression Driver, DSP controlled Input section with selectable presets, Tour grade safe and solid variable mechanics, Composite PP enclosure structurally wooden reinforced
4400 Watt, 3 way amplification, 140 dB max SPL, 8 x high power neodymium transducers, 48 kHz, 32 bit DSP processing, RDNet on board, Remote monitoring and control, Symmetrical design, Extremely low weight
2200W Two Way Amplifier, 137 dB Max SPL, 48 kHz, 32 bit DSP processing, 1.4" Titanium Compression Driver, 4.0" voice coil, 2 x 10" Neodymium Woofers, 2.5" voice coil, Exclusive FiRPHASE technology on-board, RDNet Control and Management, 680 Hz Crossover Point