DiGiCo SD10B-24 Digital Mixing Control Surface

DiGiCo SD10B-24 Digital Mixing Control Surface

DiGiCo SD10B-24: Trusted in studios all over the world

Redesigned to meet and exceed the demand of fast-paced, mission critical broadcast audio, the DiGiCo SD10B-24 delivers a wealth of features derived from the renowned SD7B, including a complete 5.1 monitor matrix with 48×6 source-to-speaker selection; multi-channel folding; user defined stem order selection; Mix Minus busses (one per mono channel); backstop PFL (over press) and Auto PFL; and Audio Follow Video implementation.

Choose from two versions of the SD10B: 37 feature-packed channels arranged in three banks of 12 motorised faders and one master fader; or 24 channels, providing the same power and functionality in a more compact frame. A familiar 15-inch backlit colour-keyed TFT touch screen forms the console’s super-intuitive central control interface.

Complex mixing tasks become second nature on the SD10B: you can recall or save presets on the channel strip; and recall or save snapshots using the master screen or hard-wired switches on the console. In addition, special functions can be assigned and accessed instantly via the console’s 40 Smart Key Macros (accessible via four layers of 10 RGB backlit keys) at the push of a button.

Under The Hood

The SD10B boasts 144 processing channels (12 of these are Flexi Channels, configurable as either mono or stereo) at 48kHz/96kHz, which is the equivalent of 108 channels of full DSP processing. Standard channel processing across both inputs and outputs includes Channel Delay, Single and Multi-Channel Presets, Dual insert points, Hi- and Lo-pass filters @ 24dB/octave, four-band parametric EQ with band curve selection, DiGiCo’s DYN 1 (Compressor, De-esser or assignable Multiband Compressor) and DYN 2 (Gate, Compressor or Ducker).

The console also benefits from 218 powerful Dynamic EQ processors, working on each of the four standard parametric bands, plus there are also 218 Multiband Compressors and 218 assignable DiGiTuBes; regardless of how the console is set up, you won’t lose any resources as all channels deliver the same pristine signal path and feature set.

The master section incorporates 24 gangable 32-band graphic EQs, 24 stereo effects, and 24 control groups (VCAs); using snapshots, you can switch between complete configurations in any live environment easier than ever before, be it at rehearsals, during system setup, or even mid-show.

The console’s 64 busses can be configured as groups or auxiliary busses; and a 24×24 output matrix, dual solo busses for PFL and on-air soloing in mono, stereo LCRS and 5.1; and an LR/LCR/LCRS/5.1 Master buss provide even deeper configurability. Unlike all other digital console manufacturers, you don’t lose Aux or Group Busses when using the Matrix as they are in addition, including the Master buss.

I/O

An abundance of I/O can be found on the rear of the SD10B, including eight mic line inputs, eight line outputs, eight mono AES I/O, two MADI connections with redundant cabling connections; and 16 GPI and GPO connections – expandable to 32.

The SD10B also works seamlessly with the DiGiCo SD-Rack, which delivers up to 192kHz high resolution analogue conversion. This opens the door to a wealth of interfacing options and enhanced flexibility: when used with the Optocore interface, up to 14 SD-Racks and five redundant engine consoles can connect to one optical loop for an incredible 1,152 I/O connections (56 inputs and 56 outputs per SD-Rack). That’s enough to comfortably mix a Philharmonic orchestra.

Get instant access to 32 fully integrated low-latency Waves stereo MultiRacks, each with up to eight plug-ins per rack, by fitting an optional DiGiCo SoundGrid module linked to external SoundGrid or DiGiGrid servers, giving a total of 128 additional I/O.

SD10B I/O Racks & Options:

The following options are available:

• SD-Rack
• SD-MiNi Rack
• SD-Nano Rack
• D2-Rack
• D-Rack
• Orange Box
• Waves SoundGrid
• Purple Box
• Little Red Box
• Little Blue Box
• RR-PSU
• UB MADI
• SD-RE Rack
• RR-PSU
• SD10
• SD10T
• SD10-24

Features:

• 144 Input Channels
• 64 Aux / Sub-Group Busses
• LR/LCR/LCRS/5.1 Master Buss
• 24 x 24 Full Processing Matrix
• 218 Dynamic Equalizers
• 48/96kHz Sample Rate

To learn more about DiGiCo, Click Here

View more products from DiGiCo

General Specifications

• Faders 37 x 100mm Touch-Sensitive, Motorised (25 on SD10T-24)
• Screens 1 x 15” (38cm) LCD High - Resolution Touch Screen
• Meters 38 x 20-Segment LED Bargraph (26 on SD10T-24)
• Input Channels 132
• Busses 56 assignable that can be configured as groups / auxiliary busses + LR or LCR Master
• Solo Busses 2 Stereo Busses
• Matrix 24 x 24 Matrix (Additional to Busses Above)
• Control Groups 24, Selectable for VCA-style, Moving Fader, Mute Group
• Graphic EQ 24 x 32-band, Gain +/- 12dB
• Internal FX 24 Stereo FX Processors
• Local I/O 8 x Mic/Line I/O, 8 x AES/EBU  I/O (Mono)
• MADI Interface 2 Redundant Interfaces, 75 Ohm BNC Connectivity
• Standard Optics
• MIDI Interface In / Out / Thru
• VGA Port DB-15 Mini-Female (1024 x 768 Resolution)
• USB Ports (3) USB 2
• Light Connection (2) XLR3 1.2 – 12V
• Ext Sync Word Clock, AES, MADI, Optics
• Headphone TRS Unbalanced / 8-600 Ohms 1/4 Inch Jack
• SD10 Dimensions 1398mm (w) x 818mm (d) x 285mm (h)
• SD10 Weight 60Kg/132lbs (175Kg/385.80lbs with Optional Flightcase)
• SD10 Flightcase  1586mm (w) x 1158mm (h) x 504mm (d) Weight 115Kg/253.53lbs (Optional)
• SD10 Power Requirements 90-264 VAC, 47-63Hz Auto Sensing.235 watts

Audio Specification

• Sample Rate: 48kHz, 44.1kHz or 96kHz
• Processing Delay: 2ms Typical @ 48k(60 Stereo Channels, Stage Input Through L-R Buss to Stage Output) 1.1ms @96k
• Internal Processing: Up to 40-bit, Floating Point
• A>D & D>A: 24-bit Converter Bit Depth
• Frequency Response: +/- 0.6dB (20Hz – 20kHz)
• THD: <0.05% @ Unity Gain,: 10dB Input @ 1kHz
• Channel Seperation: Better Than 90dB: (40Hz – 15kHz)
• Residual Output: <90dBu Typical
• Noise: (20Hz - 20kHz)
• Microphone Input: Better Than -126dB: Equivalent Noise
• Maximum Output Level: +22dBu
• Maximum Input Level: +22dBu

Processing Channel Specification
Input Channel

• Name: User-Defined / Presets
• Channel Selection: Mono / Stereo / Multi
• Input Routing: Main & Alternate Input
• Analogue Gain: -20 to +60dB
• Phase: Normal / Reverse
• Digital Trim: -40 to +40dB
• Delay: >1 Sec (Coarse & Fine Control)
• DiGiTuBe: Drive 0.01 - 50.0
• Bias 0 - 6
• LPF: 20 – 20kHz, 24dB/Oct
• HPF: 20 – 20kHz, 24dB/Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/
  Hi Shelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
• Dynamics 1: Single or Multiband (3-Band)
  
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB with
  Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard, Med, Soft
  
  De-Esser: Threshold : 20us – 20ms
  Release : 1ms – 100ms
  Ratio : 1:1 – 50:1
  Ess-Band : Listen On/Off
  Ess-Band Filter Freq / Width: 20Hz – 20kHz
• Dynamics 2: On/Off
  
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 - 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB with
  Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any Source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz
• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
• Channel Safe: Input, EQ, Dyn, Aux, Pan, Fade/Mute, Inserts, Buss, Directs,
  Full Safe
• Output Routing: Buss, Insert A, Insert B, FX
  Direct: On/Off, Pre-Mute / Pre-Fade / Post-Fade, Level +/- 18dB
• Fader: 100mm Motorised Fader ∞ to +10dB

Processing Channel Specification
Aux / Group / Matrix Output

• Name: User-Defined / Presets
• Phase: Normal / Reverse
• Digital Trim: -20 to +60dB
• Delay: >1 Sec (Coarse & Fine control)
• DiGiTuBe: Drive 0.01 - 50.0
  Bias 0 - 6
• LPF: 20 – 20kHz, 24dB / Oct
• HPF: 20 – 20kHz, 24dB / Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 8 Band EQ: 4 band Parametric and 4 band parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hi Shelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
• Dynamics 1: Single or Multiband (3-band)
  
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  with Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard, Med, Soft
  
  De-Esser: Threshold: 20us – 20ms
  Release: 1ms – 100ms
  Ratio: 1:1 – 50:1
  Ess-Band: Listen On/Off
  Ess-Band Filter Freq/Width: 20Hz – 20kHz
• Dynamics 2: On/Off
  
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 - 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  with Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz
• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn Order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
• Channel Safe: Trim, EQ, Dyn, Fade/Mute, Inserts, Outputs, Full Safe
• Output Routing: Outputs, Insert A, Insert B, FX
• Fader: 100mm Motorised Fader ∞ to + 10dB