Focal Alpha 50 EVO Professional Nearfield Loudspeaker
$359.00
Alpha 50 Evo has a 1″ (25mm) aluminium tweeter and a 5″ (13 cm) woofer with Slatefiber cone developed and manufactured in Focal’s workshops in France.
Description
Focal Alpha 50 EVO Professional Nearfield Loudspeaker
Alpha 50 Evo has a 1″ (25mm) aluminium tweeter and a 5″ (13 cm) woofer with Slatefiber cone developed and manufactured in Focal’s workshops in France. This monitor stands out for its dynamics, its neutrality of tonal balance and its excellent sonic coherence, guaranteed wherever you are listening.
Its features include a 1/4″ (6.35mm) TRS jack input in addition to the XLR and RCA analogue inputs. There is also a disengageable automatic stand-by mode as well as inserts for wall and ceiling fastening.
The high current capacity offered by its 2 amplifiers supports total control of the signal dynamics. This also allows high volumes to be reached without distortion.
The bass-reflex design, rounded edges and modern, robust side panels are another big plus for the Alpha 50 Evo, all contributing to acoustical integration and optimum aesthetics in any location.
Features:
- Excellent dynamics
- Wide dispersion, even sound retained throughout the room
- 5″(13 cm) Slatefiber cone woofer
- Large laminar vent
- Identical tonal balance at both low and high volume
- Detailed mixes
- Connect up to 3 audio sources
- Inserts for wall and ceiling fastening
- Automatic disengageable stand-by
- Protection grilles included
To learn more about Focal Audio, Click Here
View more products from Focal Audio
Additional information
| Condition | New |
|---|---|
| Brand | Focal |
Technical Specification
- Type: Alpha 50 Evo Monitoring
- Frequency response (+/- 3dB): 45Hz - 22kHz
- Maximum SPL: 101dB SPL (peak @ 1m)
- Inputs Connectors:
- TRS: symmetrical 10kOhms
- XLR: symmetrical 10kOhms
- RCA: asymmetrical 10kOhms with compensated sensitivity
- Medium and low frequency amplifier: 35W
- High frequency amplifier: 25W
- Automatic stand-by mode: After around 15 minutes of no use By signal detection >6mV
- Power supply: 100 - 240V~(T2AL fuse/250V)
- Connection: IEC socket and detachable power cable
- Sensitivity: Adjustable, 0 or +6dB
- Level Midrange/bass(0 - 250Hz): Adjustable, +/-6dB
- Treble level (4.5 - 35kHz): Adjustable, +/-3dB
- Power on/off: On/off switch on the rear panel
- Stand-by consumption: < 0.5W
- Views and controls: On and off LED - Stand-by LED
- Woofer: 5" (13cm)Slatefiber cone
- Tweeter: 25mm (1") with aluminium inverted dome
- Construction: 0.6" (15mm) MDF
- Finish: Black vinyl and paint
- Dimensions with 4 rubber feet (HxWxD): 12.2x9x9.41"(310x228x239mm)
- Weight: 13.1lbs (5.95kg)
Related products
Dual 9in MSP+ hybrid drive long-throw woofers for accurate low-end frequency reproduction.
Active Near/Midfield Monitor with 125W 8" LF, 125W 1" HF Drivers and Time-aligned Cabinet with Rear-panel Room Response Controls (each)
Active 7.1/5.1/Stereo Monitor Controller with 20 Input Sources and 3 Sets of Speaker Outputs
Dynaudio’s legendary high-frequency driver has been redesigned and re-engineered for high-performance professional use.
3-way Active Main Studio Monitor with Time-aligned 500W 1" HF, 500W 8" LF, and 2400W Dual 12" Sub-bass Drivers; Hybrid Horn/Waveguide System; and 3400W 3-channel Amplifier (each)
2-way Active Main Studio Monitor with 250W 1" HF, 250W 8" LF Drivers; Hybrid Horn/Waveguide System; and 500W Bi-amplification (each)
4" Active Nearfield Monitors with DSP Control and Mathematically Modeled Dispersion Waveguide
Stereo Monitor Controller with Digital and Analog Controllers, Three Speaker outputs, Headphone output, and now with Remote II Controller.
You have not viewed any products yet.