Focal Alpha 65 EVO Versatile Professional Loudspeaker
$459.00
Alpha 65 Evo has a 1″ (25mm) aluminium tweeter and a 6.5″ (16.5 cm) woofer with Slatefiber cone developed and manufactured in Focal’s workshops in France.
Description
Focal Alpha 65 EVO Versatile Professional Loudspeaker
Alpha 65 Evo has a 1″ (25mm) aluminium tweeter and a 6.5″ (16.5 cm) woofer with Slatefiber cone developed and manufactured in Focal’s workshops in France. This monitor features excellent dynamics and neutrality in its tonal balance. Its technologies mean that Alpha 65 Evo can guarantee excellent sonic coherence wherever you are listening.
Its features include a 1/4″ (6.35mm) TRS jack input in addition to the XLR and RCA analogue inputs. There is also a disengageable automatic stand-by mode as well as inserts for wall and ceiling fastening.
The high current capacity offered by its 2 amplifiers supports total control of the signal dynamics. This also allows high volumes to be reached without distortion.
The bass-reflex design, rounded edges and modern, robust side panels are another big plus for the Alpha 65 Evo, all contributing to acoustical integration and optimum aesthetics in any location.
Features:
- Excellent dynamics
- Wide dispersion, even sound retained throughout the room
- 6.5″(16.5 cm) Slatefiber cone woofer
- Large laminar vent
- Identical tonal balance at both low and high volume
- Detailed mixes
- Connect up to 3 audio sources
- Inserts for wall and ceiling fastening
- Automatic disengageable stand-by
- Protection grilles included
To learn more about Focal Audio, Click Here
View more products from Focal Audio
Additional information
| Condition | New |
|---|---|
| Brand | Focal |
Technical Specification
- Type: Alpha 65 Evo Monitoring
- Frequency response (+/- 3dB): 40Hz - 22kHz
- Maximum SPL: 104dB SPL (peak @ 1m)
- Inputs Connectors:
- TRS: symmetrical 10kOhms
- XLR: symmetrical 10kOhms
- RCA: asymmetrical 10kOhms with compensated sensitivity
- Medium and low frequency amplifier: 55W
- High frequency amplifier: 30W
- Automatic stand-by mode: After around 15 minutes of no use By signal detection >6mV
- Power supply: 100 - 240V~(T2AL fuse/250V)
- Connection: IEC socket and detachable power cable
- Sensitivity: Adjustable, 0 or +6dB
- Level Midrange/bass(0 - 250Hz): Adjustable, +/-6dB
- Treble level (4.5 - 35kHz): Adjustable, +/-3dB
- Power on/off: On/off switch on the rear panel
- Stand-by consumption: < 0.5W
- Views and controls: On and off LED - Stand-by LED
- Woofer: 6.5" (16.5cm)Slatefiber cone
- Tweeter: 25mm (1") with aluminium inverted dome
- Construction: 0.6" (15mm) MDF
- Finish: Black vinyl and paint
- Dimensions with 4 rubber feet (HxWxD): 13.35x10.28x11.38"(339x261x289mm)
- Weight: 16.8lbs (7.6kg)
Related products
4" Active Nearfield Monitors with DSP Control and Mathematically Modeled Dispersion Waveguide
A portable and robust 2x2 Dante audio interface featuring 2 Red Evolution mic pres, stereo line out & a stereo headphone amplifier.
Three-way Tri-Amplified system, which includes the Ocean Way tonal balance equalization system and electronic crossover.
Active Monitor Controller with 5 Selectable Inputs, 3 Selectable Outputs, and Subwoofer Output
Features of Four-way quad amplified high-resolution monitor system.
3-way Active Main Studio Monitor with Time-aligned 500W 1" HF, 500W 8" LF, and 2400W Dual 12" Sub-bass Drivers; Hybrid Horn/Waveguide System; and 3400W 3-channel Amplifier (each)
Active Studio Monitor with Digital Input and Time Delay
Monitor Controller with 4 Inputs, Ouputs for 3 Sets of Speakers, Sub Out, Talkback Mic, 2 Headphone Outs, and Individual Level Controls
You have not viewed any products yet.