Yamaha TIO1608-D2 Dante-Equipped I/O Rack with 16 Microphone

Yamaha TIO1608-D2 Dante-Equipped I/O Rack with 16 Microphone

The Tio1608-D2 is a Dante-equipped I/O rack with 16 microphone/ line inputs and 8 line outputs.

Simple, versatile, high-definition Dante Stagebox

The Tio1608-D2 is a Dante-compatible I/O rack equipped with 16 mic/line inputs and 8 line outputs. It can control gain from TF Series and DM3 consoles remotely, allowing the construction of a simple stagebox system. The versatile Tio1608-D2 also supports 96k, making it perfect for use as an I/O rack in large installations with products such as the RIVAGE PM or DME7.

The versatility and scalability of Dante

The Dante audio network standard is utilized in the DM3 and TF series, as well as in the CL and QL digital mixers. These consoles can be freely combined with the Tio1608-D2 or an R series I/O rack to create a system that matches the required scale and budget. Patching can be enabled via “Dante Controller” while Remote HA can be controlled by “R Remote” software.

To learn more about yamaha, Click Here
View more products from yamaha

General Specifications:

• Sampling Frequency Rate: External 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Signal Delay:
  • Less than 1.3 ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25 ms (one way), Fs=96 kHz
  • Less than 2.6 ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25 ms (one way), Fs=48 kHz
• Total Harmonic Distortion:
  • Less than 0.2% +4 dBu @ 20 Hz-20 kHz into 600Ω, Gain=+66 dB
  • Less than 0.05% +4 dBu @ 20 Hz-20 kHz into 600Ω, Gain=-6 dB, INPUT to OUTPUT, Fs=88.2 kHz, 96 kHz
  • Less than 0.1% +4 dBu @ 20 Hz-20 kHz into 600Ω, Gain=+66 dB
  • Less than 0.05% +4 dBu @ 20 Hz-20 kHz into 600Ω, Gain=-6 dB, INPUT to OUTPUT, Fs=44.1 kHz, 48 kHz
  • *Measured with a -18 dB/octave filter @ 80 kHz
• Frequency Response: +0.5, -1.5 dB 20 Hz-20 kHz, refer to the nominal output level @ 1 kHz, INPUT to OUTPUT
• Dynamic Range:
  • 108 dB, INPUT to OUTPUT, Gain=-6 dB, Fs=96 kHz
  • 110 dB, DA Converter, Fs=96 kHz
  • 108 dB, INPUT to OUTPUT, Gain=-6 dB, Fs=48 kHz
  • 112 dB, DA Converter, Fs=48 kHz
• Hum & Noise Level:
  • Equivalent Input Noise: -128 dBu, Gain=+66 dB, Fs=96 kHz, 48 kHz *Measured with A-weighting filter
  • Residual Output Noise: -86 dBu, Fs=96 kHz / -88 dBu, Fs=48 kHz, ST master off *Measured with A-weighting filter
• Crosstalk: -100 dB, adjacent INPUT/OUTPUT channels, Input Gain=-6 dB *Measured with a -30 dB/octave filter @ 22 kHz
• Heat Dissipation: 100-240 V, 50/60 Hz, 43.5 kcal/h
• Power Requirements: 100-240 V, 50/60 Hz
• Power Consumption: 50 W
• Dimensions:
  • Width: 480 mm (18.9")
  • Height: 88 mm (3.5")
  • Depth: 364 mm (14.4")
• Net Weight: 5.7 kg (12.6 lbs)
• Accessories: Owner's Manual, Power Cord (2.5 m), Rubber Stoppers (4)