Yamaha TIO1608-D I/O Dante Stage Box Solution

Yamaha TIO1608-D I/O Dante Stage Box Solution

The Tio1608-D is a Dante-equipped I/O rack with 16 microphone/ line inputs and 8 line outputs.

Plug In & Play Dante Stagebox Solution. The Tio1608-D is a Dante-equipped I/O rack with 16 microphone/ line inputs and 8 line outputs.

Plug In & Play Dante Stagebox Solution

The Tio1608-D is a Dante-equipped I/O rack with 16 microphone/ line inputs and 8 line outputs. Tio racks feature the same recallable D-PRE™ microphone preamplifiers as the TF series delivering extraordinarily natural and musical sound. In combination with TF series consoles, Tio racks can be connected using up to three units with a fast and easy setup.

Flexible system expansion via Dante

Dante Network Audio Protocol has been adopted, not only in TF, but also in other Yamaha digital mixing consoles such as CL/QL. Combining these I/O racks and the various consoles can significantly increase the flexibility of system designs. Patching can be enabled via “Dante Controller” while Remote HA can be controlled by “R Remote” software. Audio patching and Remote HA can be controlled not only from TF but also from CL/QL.

To learn more about yamaha, Click Here
View more products from yamaha

General Specifications:

• Sampling Frequency Rate: External 44.1 kHz or 48 kHz
• Signal Delay: Less than 3 ms INPUT to OUTPUT, connect with TF5 and NY64-D using Dante, Dante Receive Latency set to 0.25 ms (one way), Fs=48 kHz
• Total Harmonic Distortion:
  • Less than 0.1% +4 dBu @ 20 Hz-20 kHz into 600Ω, Gain=+66 dB
  • Less than 0.05% +4 dBu @ 20 Hz-20 kHz into 600Ω, Gain=-6 dB, INPUT to OUTPUT, Fs=44.1 kHz or 48 kHz
  • *Measured with a -18 dB/octave filter @ 80 kHz
• Frequency Response: +0.5, -1.5 dB 20 Hz-20 kHz, refer to the nominal output level @ 1 kHz, INPUT to OUTPUT, Fs=44.1 kHz or 48 kHz
• Dynamic Range:
  • 108 dB, INPUT to OUTPUT, Gain=-6 dB
  • 112 dB, DA Converter
• Hum & Noise Level:
  • Equivalent Input Noise: -128 dBu, Gain=+66 dB *Measured with A-weighting filter
  • Residual Output Noise: -88 dBu, ST master off *Measured with A-weighting filter
• Crosstalk: -100 dB, adjacent INPUT/OUTPUT channels, Input Gain=-6 dB *Measured with a -30 dB/octave filter @ 22 kHz
• Heat Dissipation: 100-240 V, 50/60 Hz, 43.5 kcal/h
• Power Requirements: 100-240 V, 50/60 Hz
• Power Consumption: 50 W
• Dimensions:
  • Width: 480 mm (18-7/8")
  • Height: 88 mm (3-4/8")
  • Depth: 364 mm (14-3/8")
• Net Weight: 5.7 kg (12.6 lbs)
• Accessories: Owner's Manual, Power Cord (2.5 m), Rubber Stoppers (4)