The Upton C12 microphone is based on the classic AKG C12 condenser microphone.
The Upton 251 microphone is a condenser microphone based on the classic Telefunken Ela M 251 which was produced by AKG from around 1960 to 1965.
The 5254 Dual Diode Bridge Compressor to capture the soul of these coveted compressors while providing modern updates, including advanced timing control, significantly lower noise, fully stepped controls throughout, higher voltage power rails, and internal parallel processing capabilities.
Selectable analog drive paths and active compound release analog limiting.
Large Diaphragm Multi Pattern Solid State Microphone - Microphone, Shock Mount, Hard Mount, Wind Screen in Flight Case.
The V 402 is a state-of-the art dual channel microphone preamplifier with an integrated studio grade headphone amplifier.
The Neumann NDH 20 is a closed-back headphone combining excellent isolation with the carefully balanced sound image and outstanding resolution you'd expect from a Neumann product.
The 5045 shares some traits with conventional "noise gates", but operates on a different principle.
Pair with IO-W or IO-WSP for wall mounting or small body acoustic or solid body electric instruments on stands* with IO-GC/IO-GCM.
IO-String Swing - Quickly and securely hang your favorite instruments off of Triad-Orbit stands or wall mounts with the new IO-equipped yokes brought to you by Triad Orbit and String Swing.
The patented SM-SW1 is the main pan and tilt swivel fr the SM-1 System. The SM-SW1 controls are redundant with both a locking spring pin and tension knobs. The holes are set in 15 degree increments.
The patent pending design of the SM1 System utilizes a novel slide in wall or ceiling mount. This allows the installer to set up the speaker and swivel assembly prior to hanging the speaker. The SM-WM1 also accepts the SM-PM1 pipe plate.
The SM-PM1 is a 3/4 inch threaded pipe plate for standard 3/4 NTS pipe. The SM-PM1 slides into the SM-WM1 wall plate and also screws into the SM-SW1 swivel.
SM-IOM1 attaches to the SM-SW1. It is specifically designed for temporary truss mounted Atmos systems. Pair with the Triad-Orbit IO-GC grip clamp.
The SM-7IP plates have 4, 50-80mm slotted holes that can be oriented vertically or horizontally. The SM-71P plate mounts to either JBL 705p or 708p.
The Triad-Orbit, Precision® AV Atmos Speaker Mount System offers many options for mounting onto walls, ceilings or Triad-Orbit® IO.
The 705B U bracket is designed to house the JBL 705P powered speaker and has 5 different mounting points allowing for optimum angles including 90° vertically or horizontally.
The SM-708B U bracket is designed to house the JBL 708P powered speaker and has 5 different mounting points allowing for optimum angles including 90° vertically or horizontally.
IO-String Swing - Quickly and securely hang your favorite instruments off of Triad-Orbit stands or wall mounts with the new IO-equipped yokes brought to you by Triad Orbit and String Swing.
IO-String Swing - Quickly and securely hang your favorite instruments off of Triad-Orbit stands or wall mounts with the new IO-equipped yokes brought to you by Triad Orbit and String Swing.
IO-String Swing - Quickly and securely hang your favorite instruments off of Triad-Orbit stands or wall mounts with the new IO-equipped yokes brought to you by Triad-Orbit and String Swing.
IO-String Swing - Quickly and securely hang your favorite instruments off of Triad-Orbit stands or wall mounts with the new IO-equipped yokes brought to you by Triad-Orbit and String Swing.
Quickly and securely hang your favorite instruments off of Triad-Orbit stands or wall mounts with the new IO-equipped yokes brought to you by Triad-Orbit and String Swing.
Cable Control comes in three sizes and one kit configuration- CCS Small: 3/4 in. (19 mm) diameter wrap for boom arms and the top tubes of microphone and AV support Stands (Triad TM, T1, T2, T3, T3C), as well as lightweight lighting stands.
Cable Control comes in three sizes and one kit configuration- CCS Small: 3/4 in. (19 mm) diameter wrap for boom arms and the top tubes of the microphone and AV support Stands (Triad TM, T1, T2, T3, T3C), as well as lightweight lighting stands.
Cable Control comes in three sizes and one kit configuration- CCS Small: 3/4 in. (19 mm) diameter wrap for boom arms and the top tubes of the microphone and AV support Stands (Triad TM, T1, T2, T3, T3C), as well as lightweight lighting stands.
T-O CableControl™ is a support stand cable management product that's rugged yet pliable and doesn't require any additional fasteners (velcro, tape, etc.). CableControl is made of semi-rigid 10-mil PET braid and is lightweight, quiet and flexible.
IO-Desk Long Strap Pack- Includes one (1) long strap and two (2) strap pins to hold an additional large item to your IO-Desk.
IO-Desk Short Strap Pack- Includes one (1) short strap and two (2) strap pins to hold an additional small item to your IO-Desk.
Adapts standard microphone 5/8-27 thread to 3/8-16 thread.