dBTechnologies VIO-S118R Line Array Subwoofer
Call for Price
Active 1×18″ bass reflex subwoofer, Last generation digipro G4 AMP technology, 1600 W RMS SMPS amplifier with PFC, System auto-test for quick diagnostics, Designed for maximum efficiency in the lower end
Description
dBTechnologies VIO-S118R Line Array Subwoofer
dBTechnologies VIO-S118R Line Array Subwoofer Equipped with a 18″ woofer (4″ voice coil), the bass reflex sub has been crafted to complete with impressive low-end VIO line array systems.
The system’s acoustic engine is driven by a Digipro G4® 1600W Class D amplifier, equipped with PFC (Power Factor Correction) and SMPS which make the cabinet highly resistant to line voltage fluctuations. Digipro G4 preamplifier features a slot module, equipped with a RDNet expansion card as default, allowing system monitoring and control via Aurora Net. Furthermore, the system is ready for Audinate Dante™ Expansion Card allowing integration in a digital audio network.The amplifier also allows users to run a real-time test on electronics and transducers, both remotely via Aurora Net, or directly on the amplifier module. VIO S118R shows an on-board delay module, allowing to reach a max 62 ms delay via Aurora Net and a max 9.9 ms delay with 0.1 ms steps via on-board rotary. The on-board cardioid preset processes the backward sub in inverted stack cardioid configurations, to achieve the best possible cancellation on the rear side automatically.
Features:
- Active 1×18″ bass reflex subwoofer
- Last generation digipro G4 AMP technology
- 1600 W RMS SMPS amplifier with PFC
- System auto-test for quick diagnostics
- Designed for maximum efficiency in the lower end
- ON Board delay for quick time alignment operations
- ON Board cardioid array configuration preset
- Modular slot for network and digital audio expansion cards
For more info about dBTechnologies, visit: http://www.dbtechnologies.com
Additional information
| Brand | dBTechnologies |
|---|---|
| Condition | New |
Technical Specifications
- Speaker Type: Active Bass Reflex Subwoofer
- Frequency Response [- 6 dB]: 35 Hz to Cut Freq (X-Over Dependent)
- Frequency Response [- 10 dB]: 32 Hz
- Max SPL: 139 dB
- LF: 1x18"
- Voice Coil LF: 4"
- Directivity: Omnidirectional
- Amp Technology: Digipro G4
- Amp Class: Class D
- RMS Power: 1600 W
- Peak Power: 3200 W
- Cooling: Convection + Internal Fan
- Power Supply: Full-range PSU with PFC
- Controller: DSP 32 Bit
- AD/DA Converter: 24 bit 96 kHz
- Limiter: RMS, Peak, Thermal
- Delay Option: 0- 9.9 ms | steps of 0.1 ms [on-board], 0 - 62 ms [via RDNet]
- Crossover Frequency LF-HF: Selectable 60-110Hz + Full range
- LF-Xover out slope: 24 dB/Octave
- Signal Input: 1xXLR balanced
- Signal Output: 1x XLR balanced (link or X-over)
- 1xRJ: 45 LINK (RDNet)
- Expansion Card: RDNet Card (1x RJ45 IN 1x RJ45 Link) [included], Dante card [optional]
- Mains Connections: 1x PowerCON TRUE1 In, 1x PowerCON TRUE1 Out
- Controls: 1x Input Attenuation Rotary Switch, 1x Rotary Encoder (Delay 9.9 ms), 1x Polarity Inversion Switch (0° or 180°), 1x Cardioid Mode Switch, 1x X-Over Freq Switch (60-110 Hz + Full Range, 1x System Auto-test
- Housing: Multiplex plywood, Polyurea painted
- Handles: 2x Per Side, Aluminium
- Pole Mount: M20 Thread
- Raincover: Included
- Width: 720 mm (28.34 in)
- Height: 520 mm (20.47 in)
- Depth: 695 mm (27.36 in)
- Weight: 47 kg (103.62 lbs)
Related products
Active bass reflex subwoofer, equipped with two 18" woofers (4" voice coil) and a CLASS D Digipro G3 2700 W PRG Power. The double input and output allows a mono or stereo configuration.
Active Subwoofer 2x8" 800 Watt, two 8“ woofers driven by a 800W digital power amp and an onboard digital stereo x-over.
2-way active line array system, Network ready with an integrated rdnet port, Newly designed wooden enclosure coated with polyurea, Smooth configuration and set up, Exclusively designed waveguide, Aluminum phase plugs, Advanced DSP with fir filters, Lightweight neodymium magnets, ON-Board double rotary EQ control system
Variable crossover frequencies, Precise limiter functions, On board delay for perfect time alignment, Preset for configuring cardiod systems, Settings accessible via rotary encoder, X-over out, RDnet network port
Active single 18” horn loaded subwoofer, Last generation Digipro G4 Amp Technology, 1600 W RMS class D DIGIPRO G4 amplifier with PFC, System Auto-Test for quick diagnostics, Integrated flying hardware (compatible with VIO L210), Designed for maximum efficiency in the lower end.
Active bass reflex subwoofer flyable, Integrated hardware with innovative quick-lock mechanics lightweight, 700w rms digipro® G3 class-d amplifier, Switched mode power supply with auto-range, Digital controller on board, Dual function feet
Variable crossover frequencies, Precise limiter functions, On board delay for perfect time alignment, Preset for configuring cardiod systems, Settings accessible via rotary encoder, X-over out, RDnet network port
Variable crossover frequencies, Precise limiter functions, On board delay for perfect time alignment, Preset for configuring cardiod systems, Settings accessible via rotary encoder, X-over out, RDnet network port
You have not viewed any products yet.