Martin P3-300 System Controller
The P3-300 System Controller combines the award-winning and intuitive P3 workflow with a brand new high-performance video processing engine. It can control the entire range of Martin LED Video products, ranging from traditional video panels to creative elements such as strips and dots. The P3-300 is equipped with a DVI input, a component video input and two SDI input ports (up to 3G). The output capacity of 2.000.000 pixels allows even more products to be driven from a single controller.
Features:
– Drives up to 2.000.000 pixels
– Built-in scaler and mapper
– DVI-D input up to 1920×1080
– 2x 3G-SDI input up to 1920×1080
– Analog video input up to 1920×1080
– Dedicated bi-level and tri-level sync input for genlock
– Built-in GUI (Graphical User Interface) including easy setup wizards
– Real time visualization of the video mapping within the GUI (Graphical User interface)
– Most user-friendly LED Video processor on the market
– Compatible with all Martin LED Video products (panels and creative products)
– Integration with lighting controls (DMX & Art-NET) and automation systems
– All connected products report status and problems back to the controller for easy monitoring and maintenance
– Showfiles compatible with all products within the P3 System Controller family (including the P3-PC offline editor)
Specifications:
Physical:
– Depth: 508 mm (20.0 in.)
– Width: 482 mm (19.0 in.)
– Height (rackmount 2U): 90 mm (3.5 in.)
– Weight: 9.0 kg (19.8 lbs.)
Control/User Interface:
– User interface: SXGA (1280 x 1024) or better monitor (VGA, DVI, HDMI or DP), USB keyboard, USB mouse
– Device status: Status indicator LEDs
DVI Video Input:
– Supports all resolutions up to 1920×1080
– Supports both RGB and YCbCr, progressive or interlaced
Component Video Input:
– Via DVI-I breakout cable (not supplied)
– Supports all resolutions up to 1920×1080
– Supports progressive and interlaced scan
– 10-bit color sampling
– Supports composite NTSC/PAL/Secam, S-Video (Y/C) and component YPbPr w/Sync-on-G (Y)
– Supports tri-level sync
SDI Video Input:
– 2 x SD-SDI 525/60 (NTSC) or 625/50 (PAL) per SMPTE 259M
– 2 x HD-SDI 720p per SMPTE 296M or 1080i per SMPTE 292M
– 1 x dual-link HD-SDI per SMPTE 372M
– 2 x 3G-SDI per SMPTE 424M (compatible with level A and level B sync)
Genlock Input:
– Supports bi-level and tri-level sync
Video Processing:
– Controller pixel processing capacity: 2 000 000 pixels (expandable by adding P3-300s)
– Controller fixture capacity: 2000 fixtures (expandable by adding P3-300s)
– Maximum workspace area: 2 073 600 pixels
– Maximum active capture area: 2 073 600 pixels
– System processing depth: 16 bits per color (48 bits per pixel)
– System latency, DVI: 2 frames
– System latency, SDI/component progressive: 2 frames
– System latency, SDI/component interlaced: 3 frames
– Latency between first and last panel: None
– Image rotation
– Scaling (global and mixed pixel pitch)
– De-interlacing
– Gamma curve selection and adjustment
– Real-time panel content remapping
– Real-time color temperature and color space control
– Real-time preview of video input and mapped canvas
– DMX 512 / Art-Net real-time controllable parameters
– Global intensity
– RGB intensity
– Color temperature
– X-Y video image position
– Video image rotation
– Freeze
– Blackout
– Test pattern selection
– Preset recall (incl. video input selection and scaling)
– Kinesys K2 / Tait Navigator real-time controllable parameters
– X-Y video image position
– Video image rotation
P3 Signal Protocol:
– Signal type: Gigabit Ethernet
– Protocol: Proprietary Martin P3
– Hot pluggable: Yes, electrically isolated at all connections
– Cable type: Ethernet, shielded, CAT 5e or better
– Cable length: Up to 100 m (328.1 ft.) between any 2 devices, extendable with Ethernet switch
– Max. number of panels per line: 50, extendable with Ethernet switch
Construction:
– Housing: Steel and aluminum
– Color: Matt black
– Protection rating: IP20
Installation:
– Mounting: 19-inch rackmount (2U) or free-standing
Connections:
– Power input: IEC socket with integrated power switch
– P3 data in/out: 4 x etherCON socket
– DVI/component video in: DVI-I (component via BNC-to-DVI-A adapter cable, not supplied)
– DVI/component video thru: DVI-I
– SDI video in: 2 x BNC
– SDI video thru: 2 x BNC
– Genlock in: 1 x BNC
– Genlock thru: 1 x BNC
– Management network: etherCON socket
– EtherDMX / motion network (Art-Net, Kinesys K2/Vector): etherCON socket
– DMX in: 5-pin locking XLR
– DMX thru: 5-pin locking XLR
– Peripherals and USB memory devices: 4 x USB 2.0 ports
– User interface monitor: DisplayPort++ (compatible with adapters to DVI, HDMI and VGA, not supplied)
Electrical:
– AC power: 100-240 V nominal, 47-63 Hz
– Power supply unit: Integrated, universal multi-voltage
Thermal:
– Cooling: Forced air
– Maximum ambient temperature (Ta max.): 50° C (122° F)
– Minimum ambient temperature (Ta min.): 0° C (32° F)
– Total heat dissipation*: 685 BTU/hr.
– *calculated, +/- 10%
Approvals:
– EU safety: EN 60950-1
– EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3, EN 6100-4-2, EN 6100-4-3, EN 6100-4-4, EN 6100-4-5, EN 6100-4-6, EN 6100-4-11
– US safety: ANSI/UL 60950-1
– Canadian safety: CAN/CSA C22.2 No. 60950-1
Included Items:
– EU-type power cable with Schuko connector
– US-type power cable
– UK-type power cable