Martin MAC Viper Wash

The MAC Viper Wash is a full-range wash luminaire capable of performing at the high level you would expect from a professional wash light. It features an outstanding quality of light with unlimited color choices and excellent color stability across the entire beam. It maintains near full efficiency throughout the entire zoom range with no visible beam jump when zooming from tight to wide. The MAC Viper Wash has adopted the compact form, impressive speed, superior light quality and beautiful colors that the MAC Viper Profile is renowned for and uses the same 1000-watt lamp.

Features:

– 33000 Lumens – Excellent light quality with a uniform field and 6000K color temperature
– 1:5 zoom – Continuous and fast
– CMY – Vibrant color mixing with a superior palette of colors including true reds, rich ambers, primary green and deep blues
– Linear CTO – Daylight to tungsten CCT control and expansion of the CMY palette
– Dimmer and shutter – Combined dimmer/shutter system with intensity effects, instant blackout/open and smooth fades
– Diverse strobe effects

Specifications:

Physical:

– Length (base): 472 mm (18.6 in.)
– Length (head): 566 mm (22.3 in.)
– Width: 473 mm (18.6 in.)
– Width (base): 335 mm (13.2 in.)
– Height (head straight up): 732 mm (28.8 in.)
– Height (maximum): 749 mm (29.5 in.)
– Weight: 33 kg (72.8 lbs.)
– Minimum center-to-center distance in side-by-side installation: 650 mm (25.6 in.)

Dynamic Effects:

– Color mixing: CMY, independently variable 0 – 100%
– Color temperature control: CTO, variable 6000 – 3200 K
– Mechanical dimmer/shutter: 0 – 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout
– Dimming options: Choice of four dimming curves
– Focus: Range varies with zoom angle, from 2 m / 6 m to infinity (approx.)
– Zoom: Motorized
– Pan: 540°
– Tilt: 268°
– Position correction system: Absolute position monitoring

Control and Programming:

– DMX channels: 18/24
– Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
– 16-bit control: Dimmer, pan, tilt
– DMX compliance: USITT DMX512-A
– RDM compliance: ANSI/ESTA E1.20
– Receiver: Opto-isolated RS-485
– Firmware update: USB memory device or USB/DMX hardware interface over DMX link

Lamp:

– Type: 1000 W short-arc discharge
– Color temperature: 6000 K
– CRI (Color rendering index): >85
– Average lifetime: 750 hours
– Socket: PGJX36
– Ballast: Electronic
– Approved lamps: Osram Lok-it! 1000/PS Brilliant, Philips MSR Gold MiniFastFit 1000W

Optics:

– Zoom range: 13.5° – 59° (1:5)
– Output: 33 000 lm

Service Utilities:

– Fixture identification: User-settable fixture ID number

Construction:

– Color(s): Black
– Housing: UV-resistant fiber-reinforced composite
– Reflector: Glass, cold light
– Protection rating: IP20

Installation:

– Mounting points: Eight quarter-turn locking points
– Orientation: Any
– Minimum distance to illuminated surfaces: 3.4 m (11.2 ft.)
– Minimum distance to combustible materials: 0.3 m (1.0 ft.)

Connections:

– AC power input: Neutrik PowerCon
– DMX and RDM data in/out: 5-pin locking XLR
– USB memory devices: USB host socket

Electrical:

– AC power: 120-240 V nominal, 50/60 Hz
– Power supply unit: Auto-ranging electronic switch-mode
– Typical half-cycle RMS inrush current: 16.2 A

Typical Power and Current:

– 120 V, 60 Hz: 1225 W, 10.3 A, PF 0.999
– 208 V, 60 Hz: 1190 W, 5.8 A, PF 0.996
– 230 V, 50 Hz: 1186 W, 5.2 A, PF 0.994
– 240 V, 50 Hz: 1194 W, 5.0 A, PF 0.993
– Measurements made at nominal voltage. Allow for a deviation of /- 10%.
– PF = power factor

Thermal:

– Cooling: Filtered forced air (temperature-regulated, low noise)
– Maximum ambient temperature (Ta max.): 40° C (104° F)
– Minimum ambient temperature (Ta min.): 5° C (41° F)
– Maximum surface temperature, steady state, at 40° C ambient: 150° C (302° F)
– Total heat dissipation (calculated, /- 10% at 120 V, 60 Hz): 4180 BTU/hr

Approvals:

– EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
– EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61547
– US safety (pending): UL 1573
– US EMC: FCC Part 15 Class A
– Canadian safety (pending): CSA E598-2-17 (CSA E60598-1)
– Canadian EMC: ICES-003 Class A
– Australia/NZ: C-TICK N4241

Included Items:

– Lamp (installed): P/N 97010346
– Two Omega clamp attachment brackets with 1/4-turn fasteners: P/N 91602001
– Safety and installation manual: P/N 35000258